Knowing a few handyman Long Beach tips can be advantageous for you. For one, they can save you money. You can also save time as you will be able to the problem yourself rather than waiting for the professional to come over.
To help you get started with being a Long Beach handyman, here are a few tips and tricks:
Fixing A Garbage Disposal
First off, you’d want to cut the power that supplies the garbage disposal. To do this, just go under the sink and unplug the power supply. If you can’t find it, then you’d want to flip the circuit breaker.
The next step for a handyman Long Beach CA is to hit the reset button which is usually located under the cylinder-shaped part of the garbage disposal. Then, try to remove any debris that is stuck in the mouth of the garbage disposal. These steps will solve most of the problems.
If the 2 fixes mentioned above fail, the last thing you can do is to turn the blades manually. At the bottom of the unit, there’s a small socket in which you can insert a hex key or Allen wrench. Then, turn the Allen wrench or hex key, and the blades will rotate.
Fixing A Running Toilet
To fix a running toilet, the first thing a handyman services Long Beach CA needs to do is to turn the toilet water knob. This will cut the water supply to the toilet tank. Once this step is done, you can lift the top of the tank to have a good look inside. In most cases, there’s a problem with the flush valve or flapper which results in the constant draining of water. To fix this, you may have to do some re-adjustments so the flapper or valve is able to completely prevent the water from draining needlessly. The other option is to buy a replacement part which shouldn’t cost more than $20.
Hit The Nail, Not Your Hand
If you want to keep your hands away from the striking hammer, you should use pliers to hold the nail. A fine plastic comb can also hold the nail for you. With this tip, you’re almost guaranteed to never hit your fingers accidentally.
Fixing A Clogged Drain
Let’s start with the easy fix. What you can do is to use a gel or liquid drain cleaner. If this does not fix the problem, then warm some water and add detergent into it. Pour this concoction into the drain. Leave it for at least 10 minutes. This mix will act as a lubricant so the debris can easily slide out. If this still does not work, then the last thing you can do is to use a plunger. Make sure that the sink is covered with water so the water pressure will clear out the clogs when you use the plunger,.
If you want to remove paint, there’s an easy way of doing it without using sandpaper. What you can use is a chemical stripper. Just spray it on the paint you want to remove, let it sit for a while, and finally scrape off the paint.