Completing a piece of gear blows fuses it’s important to discover why. Fuses are a safety feature for the electric system, preventing damage to the gear in addition to possible damage to the operator. When a John Deere L110 keeps blowing fuses, the first task is to track down the cause by taking a good look at which fuses keep going out, and determine why.

Explain the Affected System

Usually when your lawn tractor blows fuses, only a single system is influenced. The issue might be in the starting system, the headlights or the power take-off, called the PTO. If the tractor will not begin, it’s the electric starting system, even if the headlights do not work, the problem is localized there, and if you can not raise and lower the cutting blades, the problem is at the PTO system.

Inspect the Wires

Damaged wiring may be accountable for fuses that maintain blowing for no apparent reason. Check the wires for signs of wear, especially missing bits of insulation in which it’s cracked, melted or been otherwise damaged. If you find damage, replace the wires. Always use the appropriate gauge wiring, as replacing wiring using wires the wrong size can produce a risk of fire.

Assess the Starter

If your John Deere L110 lawn tractor won’t begin or if it tries to start but repeatedly blows fuses, the problem is likely a defective starter or starter wires. If you can not see anything when you examine on the wires, then the problem might be internal to the starter. Eliminate the starter and have it examined by a John Deere dealer. Replacing it will most likely solve the problem.

Assess the PTO Switch

The PTO switch controls the power take-off system, which raises and lowers the mower deck. If the switch will not lower the deck, you can not cut grass. If the switch blows the fuse when you attempt to use it and you can not see anything wrong with the wires, then the problem is likely a short inside the PTO switch. Have it checked for electrical problems and replace if needed.

See related

It is possible to speed up upkeep chores by installing a three-way diverter valve if your pool doesn’t have one. This valve is designed to divert flow from the skimmer line, the main drain — or even both at precisely the exact same time — to the pump. The 3 lines form a tee using the pump outlet forming the vertical leg of the elbow as well as the bend lines forming the horizontal legs. Together with the valve handle facing one of the outlets, the opposite outlet is closed. To alter water flow management, move the valve manage through 180 degrees and line it up using the alternate outlet. To open both horizontal ports for standard operation, line up the handle vertically using the handle facing the pump inlet.

Loosen the lock knob on top of the valve manage by undoing it a full turn in a counterclockwise direction with an adjustable wrench, and then move the handle halfway between the two inlet ports. Use a Phillips screwdriver to remove all of the 8 screws securing the valve mechanism into the valve body.

Grasp the valve handle with one hand and the valve body with another. Rock the handle from side to side to loosen it and pull on the valve assembly from the valve body. This will avert PVC cement from accidentally sticking to the delicate valve assembly when you glue pipes into the body.

Line up the valve body halfway between the skimmer and drain suction lines protruding from the ground. Gauge the distance from the valve suction ports into the skimmer and drain lines, as well as the space from the valve outlet to the pump inlet port. Add 3/4 to 1 inch for the joints on each end to overlap the fittings; this will vary slightly, depending on pipe diameter and matching configuration.

Measure and mark the cut lines on the 3 schedule 40 PVC pipe segments. Use pipes which match the width of the pipes on your existing pool plumbing; these may be 1 1/2 or two inches in diameter.

Clamp the pipe at the right vise before cutting, but do not distort the pipes by over tightening the vice. Cut through the pipes back while maintaining the cut as straight as possible. Utilize a tough half-round file to remove the rough edges from the interior and outside of the cut pipes.

Apply a thin coat of purple PVC primer to both faces of every joint to be pasted while taking care to not get any on the valve body ports.

Apply a thin layer of CPVC glue to both faces on a joint, keeping it well away from valve body ports, and insert the pipe instantly into the valve port when utilizing 1 1/2-inch diameter pipe; when utilizing 2-inch diameter pipe, insert the valve body to the pipe instead.

Give the pipe a quarter turn to spread the adhesive evenly. Wipe the interior of the valve body using a rag dampened with a trace of paint thinner if any adhesive encroaches inside the port. Treat both of the other joints in precisely the exact same method.

Line up the “Inlet” label on the valve assembly together with the pump line to the vertical leg of the elbow. Slide the valve assembly to the valve body, replace the eight screws removed earlier and snug down screws down in turn without over-tightening them.

Glue 90-degree PVC pipe couplings into the ends of the skimmer and drain lines, taking care to place the couplings at right angles into the diverter valve, and allow adequate drying time.

Install the valve by curbing another ends of the downward facing 90-degree couplings into the pipes protruding from the bottom.

Complete the installation by curbing the inlet end of the pipe resulting from the diverter valve into the pump inlet port using a suitable coupling. Allow adequate drying time before beginning the pump to check for leaks and to test the valve’s actions.

See related

If you’re trying to decide between liners and polyurethane for your tabletop, you can stop scratching your mind: They’re basically the same product. The choice between varnish and shellac, however, is a real one, and do not forget to add lacquer for your list of alternatives. It is similar to shellac in a few ways, but it is a different end, and it is among the very popular and powerful tabletop finishes you may use.

Treating vs. Non-Curing Finishes

Varnish, whether it contains alkyd or polyurethane resin — or a combination — is an illustration of a healing finish. Once the solvent dissolves, the resin undergoes a chemical reaction that can’t be reversed. Shellac and lacquer, on the other hand, simply harden by evaporation of the solvent, and if you add more solvent, these finishes can become soft again. Curing finishes resist a wider selection of solvents, while evaporative finishes are more delicate and easier to repair. Unlike the solvents in lacquer and shellac, those in varnishes evaporate slowly, therefore varnishes level nicely once you apply them using a brush.

Shellac and Lacquer

When you apply a shellac finish, you’re coat your tabletop with resin secreted by insects. This resin — called lac — is harvested from tree branches and condensed into flakes. When dissolved in denatured alcohol, the flakes make a thick solution which you can spread using a brush or spray. Lacquer originally comes from tree sap, and also the kind that ancient Japanese craftspeople utilized was a healing finish. Modern lacquer, however, is composed of a non-curing cellulose or acrylic resin dissolved in volatile solvents. The solvents evaporate quickly, which means you have to spray lacquer, unless it contains an additive to retard evaporation and leave the product brushable.

The benefits of Evaporative Finishes

People have appreciated shellac over the years because it gives a delicate and durable finish. The end on several antiques is shellac, and it is usually the ideal end to apply to your antique tabletop. Modern lacquers were not developed until the 19th century, and also among the reasons for their popularity is that they’re sprayable and dry fast, which means that you may apply several coats fast to build up the end. Because evaporative finishes soften once you apply solvent or fresh finish, they’re easier to repair than curing finishes. They achieve their best hardness after waxing and buffing.

The Varnish Alternative

One of the main ingredients in varnish is linseed oil, a hardening oil derived from flax seeds. Conventional varnishes include plant alkyds, which harden and cure to form a permanent film. Modern varnishes, on the other hand, frequently contain polyurethane, which is a synthetic plastic, or a combination of alkyd and polyurethane. A varnish finish is not delicate — alkyd varnishes have a tendency to yellow, and polyurethane varieties have a plastic-like look — so that they aren’t ideal coatings for fine furniture. They are resistant to a lot of strong solvents and may soften lacquer and shellac, though, and therefore are ideal for outdoor tabletops, bar tops and utility components.

See related

Homeowners insurance is two kinds of insurance in a single. Liability insurance pays medical bills and authorized costs should someone injures himself on your premises and decides to sue you. Hazard insurance pays the cost of damages in case your house or its contents are damaged by fire, wind, rioting and other perils. Without hazard insurance, the cost of repairs will come from your pocket.

Function

Hazard insurance covers damage and destruction by fire, smoke, wind, hail, theft, vandalism, lava and lots of additional”named perils” listed in the policy, as stated by the Nolo legal website. If you submit a claim, the insurance company may reimburse you for repairs up to the max under your policy, less the deductible. Hazard insurance not only covers your house, but automatically covers the contents up to a specific amount depending on the entire size of your policy.

Significance

Should you take out a mortgage, you must take out hazard insuranceIt provides lenders security that if your house–the collateral on your mortgage–is damaged, it may be mended and will not lose any of its worth. Your lender will decide on a minimum amount of coverage, Nolo says, but you may select to increase that to guard your house better.

Types

Under a cash-value policy, Investopedia says, you are going to be reimbursed for the purchase price of whatever is damaged, less depreciation: If you put in a claim for the five-year-old big-screen television, the insurance company will base your payment on the cost you paid for this five years of wear and tear. With a replacement-value policy, you are going to receive the cost it would cost to buy a new TV. A $125,000 hazard insurance policy would cover the price of rebuilding your damaged home to its original state up to the $125,000 limit.

Factors

Hazard insurance doesn’t cover everything, Investopedia points out: Should you need flood insurance, for instance, you are going to have to purchase it separately. Many policies only offer partial coverage for high-value possessions like jewelry, collectibles or artwork, so to pay such things entirely, you’ll want to buy additional insurance. Many policies also state that if an older home is damaged and must be rebuilt to current building codes–which might call for more-expensive roofing, windows or electrical systems–the insurance company won’t pay the excess cash to deliver it up to code.

Expert Insight

You are going to have to provide proof of what your home contained in order to create a claim, Nolo says: Photograph your expensive things and maintain the sales receipts and other documents. But, Nolo advisesthat you should be careful about making promises –if you create more than the insurance company is comfortable withyour premiums will increase and your insurance may be canceled.

See related

With the country’s staggering foreclosure rate, banks and other lending institutions wind up with a glut of properties to sell or rent. Throughout the foreclosure procedure, the homeowner will occasionally react to being evicted with anger, trashing the home, eliminating built-ins and leaving the house uninhabitable. To find the house ready to market , banks, or their listing broker, will employ cleaning companies. While foreclosure cleaning is not a new concept, it has grown into a popular market business in the last few decades and can be very rewarding.

Obtain insurance and a business license. A number of the people you will be working for need a license and insurance, to open yourself to the utmost amount of feasible jobs, this should be your first step. Your insurance broker can advise you as to the minimum amount of liability insurance to carry and whether you will require employee’s compensation insurance.

Structure your foreclosure home-cleaning business. There are a number of structures from which to pick. You may opt to offer one-stop services, where you trash-out, change the guards, plank paint, windows, drain the pool and take care of the landscape, as well as clean the interior of the house. Limiting your services to cleaning the home’s interior is. Some companies offer a menu of solutions.

Invest in the correct gear. This will depend on the sort of services you will be offering, but at the very least you will require a commercial vacuum cleaner and carpet cleaner, long-handled squeegies, mops and cleaning solutions. If your plan is to offer full-service cleaning, such as trash-outs (the removal of what in the home) you will require a large truck as well.

Find out more about the contest to determine how much to charge for your services. You may also call a few local foreclosure real estate agents and inquire what they generally pay for various cleaning jobs.

Obtain the right forms you will have to conduct the foreclosure home-cleaning business. These include, but aren’t limited to, bid contracts and forms. There are free bid forms available on the internet that you can customize for your company. Your attorney can help you with drafting your contract.

Promote your company to the local real estate community, especially those agents who specialize in foreclosures. Produce a batch of tricky, colour fliers and deliver them to real estate offices in the area that you want to work. Go open houses and drop off the fliers to the broker on duty. This face-to-face assembly with real estate agents also presents an opportunity for you to talk with them what you have to offer. Offering a discount on the initial cleaning job is a nice enticement.

Present yourself in a professional manner and provide good customer services. This can help to build your reputation. Real estate agents consult with other agents when seeking vendor referrals. Your good standing will go far in setting your company at the top of all your customers’ lists.

See related

In accordance with Global Home USA,”66 percent of home buyers report that the failure of two major items in their home within the first year of possession.” Typically purchased as part of home sale trades, home warranties offer”peace of mind” protection for the failure of appliances and home systems. The popularity of those warranties increases buyers’ concerns regarding the load of expensive maintenance and repairs in the early months and years of homeownership. In California, 90 percent of home sales consist of home warranties. Broadly speaking, the policies are relatively inexpensive. However, not all of repairs are insured, so it is important for the warranty holder to comprehend the contract’s pros and cons.

Guru: Discounted Service Calls

A typical component of home guarantees is a diminished, flat-rate fee for support calls that provides significant savings over the common costs of repair appointments. Service prices often can be reduced further when contract upgrade options are selected.

Guru: Big Savings on Common Repairs

Standard warranty contracts include repair or replacement of many of the appliances and systems that many commonly neglect. Examples include kitchen ranges, electric systems and plumbing fixtures.

Guru: Possibility of Enhanced Coverage

Most providers offer users a number of program options. For additional charges, guarantees can be enlarged to include repair or replacement of such items as pools, spas and multiple air conditioning units. Additionally, policies might be updated to pay preexisting conditions–conditions that occur before the policy was in force.

Con: A Few Home Types Might Not Be Covered

Mixed-use, commercial/residential properties might be excluded. Additionally, it might be impossible to get a warranty for a mobile home or other residence not attached to a permanent foundation. Also, it’s unlikely that policy would be extended to homes not owned by the warranty holder (dorms, leased homes and timeshares, for example).

Con: No Guarantee of Replacement vs. Repair

The warranty provider, not the homeowner, decides whether a covered appliance or system should be replaced or repaired. It follows that even when the appliance or system is obsolete, it is possible (and maybe even likely) that it will be repaired rather than replaced.

Con: No Choice of Repair Service Providers

Warranty suppliers contract with service providers. Homeowners can’t pick their own. Nor can they generally dictate the period of time within which fixes will be produced, even though the warranty provider might incorporate a time range in its own contract.

Con: Policy Exclusions May Leave Buyer Vulnerable

Warranties cover operational failure of appliances and systems only under specific conditions, like after normal usage, once the appliance or system has been properly preserved by the homeowner. Conditions brought on by acts of nature or acts of God might be excluded, as they’d probably be covered by the homeowner’s hazard insurance. What’s more, there are caps on how much warranty providers will pay per appliance/system, per incident.

See related

There’s a briskness in the air. That means it’s time to cozy up your home for the pets. Sure, the human family members are important, but we can not deny our furry housemates those same creature comforts we like. Below are some tips for getting your pets’ hangouts and bedding ready for the cooler temperatures in ways that are attractive to individuals.

Portico Design Group

Construct them their very own nook. Cutouts in this way circular one create the pet part of the decor …

Heaven & Stubbs Bespoke Furniture Ltd

… or the reading experience.

Spring Creek Style

The oversize mouse hole inside this cellar is in fact the ideal size for an old house cat that prefers to keep out of the action upstairs.

B&S Woodworking Inc..

While cats may split from the family pleasure, dogs generally prefer to lie right in the heart of it. Invite Buddy to not be a tripping hazard, especially in the kitchen, where it can be a severe hazard. Instead, give him a safer hangout all of his own from which he can monitor the action.

Wherever you find the area for this a pet nook, fill it with lavish materials that can be washed easily and frequently.

Window Expressions by Janet

Construct them a bench. Pets aren’t demanding; they just require a little space to call their very own. How about giving Kitty her perfectly sized, custom-made bench in the sun? That is not asking a great deal.

Busby Cabinets

Create a cave. Dogs normally crave a cave-like bed (if they aren’t sprawled out in everybody’s way). This undercounter crate provides the same atmosphere. A fitted cozy inside offers added warmth on freezing nights.

Brenda Olde

Rather than attempting to conceal the kennel, turn it in to furniture. This dog’s kennel acts as a table base that sits smack dab between his esteemed pack leaders’ seats.

Vanni Archive/Architectural Photography

Give them matching furniture. Not into showing off the kennel? Create an elegant bed that looks the remainder of the decor of the room.

Find pet furniture or pillows that share similar properties along with different aspects of this room, such as colour, finish, texture or shape. This pet bed blends in well with the living room, as a result of its library-like attributes.

Landing Design

This small Brussels Griffon gets to make himself at home on a love seat beneath his portrait when he isn’t hanging out in his room. With something like this, just make sure guests know not to sit in the no-human zone.

Watch more of the Home

Artwork: Laura Alexander

For Folks design

If there’s absolutely no delineation between people and pet furniture, lining furniture with stylish shouts offers extra cush to cushions while keeping fur them off. Just be certain that your throws (and some other nearby pillows) are as washable as they are attractive.

A+B KASHA Designs

Keeping Things Clean and Other Considerations

Washability. Washability is an important factor for virtually any fabric that your pet sleeps on, especially during the rainy season, when muddy paws are quite continuous.

This man’s easy; he does not need his bed. He’d much rather sleep between his human companions. Fantastic thing that the comforter washes well.

Kitt Haman Design

Time apart at night. Simply because your pets want to sleep next to you does not mean there is room for everybody. If you like having your love bugs close to you at night, consider giving them a bench at the foot of their bed as their very own. This way they could see and listen to you without sandbagging your toes.

Kailey J. Flynn Photography

Style. For bigger breeds or multiple pets that like one another’s company during the night, pick a bed that matches your own. There are no rules regarding what a pet’s bed should look like. As long as the bed is comfy for the animal, take liberties to make its design function with your room.

COOK ARCHITECTURAL Design Studio

Color. It is believed that animals can not see colour like we people could. But that does not mean their bedding can not offer colour in prosperity to please our preferences. Pet pillows and upholstered cushions can be chances to include shots of seasonal colour or pull from the present room palette.

Scheer & Co..

Outdoor shelter. Not many pets are permitted — or desire — to sleep inside. It is especially important to make sure they’re sheltered from the elements. This customized wine barrel is a stylish covered bed that doubles as a planter box.

Your turn: Show us how your pet is becoming cozy for this season.

See related

We recently got hit with a heat wave in my region, which instantly made me long for the cooling impact of delicious ice cream. This year, my urge also happens to be among the strongest fashion trends of the season, with all the cold treat’s soft hues cropping up all over. Whether it’s warm or chilly where you’re, ice cream-inspired colors are sure to be a welcome treat. — Chedva from Rooms and Words

Michelle Armas

Elka Three Printing – $35

I’ve got a reserved place in my living space to get a Michelle Armas painting. I really like how she blends abstracts and florals, and the colors are almost always dreamy.

Furbish

Caneel Bay Bar Cart , Turquoise – $800

A minty-fresh bar cart. What could be more ideal for summertime?

Anthropologie

Aldo Pitcher – $268

This pitcher would look great on a mint bar cart, and the streamlined design keeps it from appearing overtly feminine.

Terrain

Sunlit Stems Printing – $148

This still life painting, from Terrain, reminds me of one my parents had. It’s a classic for any season — if you’re enjoying longing or spring for it.

Serena & Lily

Classic Whites Collection In Berry – $68

If you’re uncertain about committing to a great deal of ice cream colour, here’s a great bedding set with just the ideal amount.

Society Social

The Cocktail Party – $995

I adore this peachy dining collection. Those intricate details that you see are the seats pushed in.

Live Like You

Antique Yellow Lamp – $420

A gorgeous banana-yellow updates a traditional table lamp shape. I’d certainly put two of them on a console behind a couch.

Design Darling

Quartz Bookends – $75

I always have had a thing for diamonds, particularly quartz. These bookends are so cool and soothing to the eye on a hot day, and they will work in almost any decor style.

Chic Shop

Orange Crush – $55

Doesn’t this finial seem like a cherry popsicle? I can’t help but fall in love with all the gemstone. It’s the perfect small twist for any lamp.

Niki Jones

Mother Of Pearl Butterfly Mirror – GBP 875

The Moorish shape and details of this mirror are stunning, and the subtle colour adds so much better.

1stdibs

Dino Martens Rainbow Swirl Vintage Murano Lamp

This beautiful rainbow swirl lamp dates back to the 1950s and is made of actual Murano glass!

Garnet Hill

Lilly of the Valley Shower Curtain – Garnet Hill – $88

Why should you forget your shower? A sunny shower curtain is the perfect mood boost in the daytime.

Horchow

Massoud Montego Storage Cube – $779

What I love about this ottoman is that regardless of the elastic color, it is made from a fairly cold proper material, therefore it stays applicable year round. Additionally, it doubles as a storage block — ideal for apartment living!

Design Within Reach

Freedom Task Chair With Headrest, Sabrina Leather, Bamboo – $2,465

Who says all work seats have to be brown or black? Bringing a cheerful ice cream colour into the area where we spend a lot of our period is a brilliant thought.

Stray Dog Designs

Ferdinand – $275

Love the taxidermy trend but not so much that the act of taxidermy? A papier-mâché bull (at a cherry color) will take the stuffiness from the appearance.

Garnet Hill

Concentric Cutting Garden Chenille Rug – $78

I love using rugs to inject colour into a space. These rugs have many colors in them, yet they have a harmonious appearance that makes them a genuine find.

1stdibs

Classic Italian “Wicker Works” Bench With Les Toiles Du Soleil Uph.

I am able to see this 1970s Italian seat in an entryway, kitchen, playroom or on the porch — it would add instant oomph.

Artecnica Themis Mobile – $40.70

Contemporary design doesn’t have to be intense, it actually has a great deal of comedy in it, just enjoy this mobile from the MoMa store.

House & Hold

O&G Studio Atlantic Table Height Stool – $195

I really like stools since they serve so many functions. They are sometimes a side table, a storage solution, extra seating or a ladder. These fun ones would look great anywhere in the house.

Garnet Hill

Japanese Peony Candle With Scented Petals By Red Flower – $34

Doesn’t this look like? Well, it is actually a coral-scented candle.

Next: Favorite Color Combinations: Neapolitan

See related

Harder than many hardwoods — Brazilian teak — also called Cumaru or Brazilian chestnut, adds natural beauty to your home inside or outside. Mainly found in the northern areas of South America, Brazilian teak is now the go-to floors and decking wood of choice as more people become aware of its characteristics, though it could be hard for the beginner do-it-yourself to install. Even harder than routine teak, and less expensive, Brazilian teak wood grains depict enough unusual beauty the flooring does not require staining, even in hues of yellow-browns and red-browns that go well with many interior decoration approaches.

The Hardness Factor

The Janka Hardness Scale appraises the proportional strength of timber, and higher numbers on the scale imply harder woods. The test that gauges the hardness of the timber measures the amount of force in pounds it takes to embed roughly a 1/2-inch steel ball halfway into the timber. Having a Janka hardness dimension of 3,540 lbs, Brazilian teak is almost three times as strong as red oak, that has a Janka rating of 1,240.

Tight, Dense Grain

Since the timber has a tight, dense and fine grain, this feature alone allows it to withstand rot, fungi, mildew and even ultraviolet damage when used as flooring within or decking material out of the house. Brazilian teak wood can also be very oily, which helps it resist stains as it doesn’t allow moisture to penetrate into the timber. Its dense grain also means it is easier to keep clean, an additional plus for any homeowner. Its water-repellant features allow it to be usable in bathrooms or outdoors to the deck, contrary to other hardwoods.

Distinctive Colors, Ages Properly

Besides red-brown and yellow-brown, you can also find mahogany colors and sometimes black striping in the darker teak planks that provide your floor a look. Homeowners are advised against adding oil finishes into the timber, says Wood Flooring International, as the finish may not dry. If left to itself, then the floors develops a patina with age. Suppliers recommend water-based or moisture-cured urethane as closing finishes for the floors.

Cautionary Tales

The wood is so tough that it takes carbide saw and drill bits to cut and penetrate it. Build Direct recommends predrilling the timber if you’re planning to nail it and hammering by hand instead of using a nail gun or pneumatic instrument. Do-it-yourselfers may find working with Brazilian especially challenging due to this. Exposure to dust may cause contact dermatitis reactions and allergies when working with the material. When buying Brazilian teak timber, make an eco friendly choice by selecting a provider certified by the Forest Stewardship Council that only supplies second-growth timber from FSC-certified harvesters to ensure it does not come from old-growth South American rain forests.

See related

One of the reasons to grow small plants in a terrarium will be to supply humidity than could be seen in most homes to growing conditions. Completely closed terrariums retain high levels of moisture and require watering, but there’s also probability of plant diseases developing in the stagnant atmosphere. A good compromise can be achieved by establishing a terrarium with venting to supply air movement and a misting system to supply the humidity.

Reservoir and Vacuum Installation

Drill a hole in the side of the painter’s bucket close to the base. The hole’s size will rely on the bulkhead fitting. A 5/8-inch or 9/16-inch drill bit should function with fittings intended for 1/4-inch tubing.

Insert the bulkhead fitting to the pit, with the O-ring on the surface between the bulkhead plug and the bucket. Tighten the nut which came to hold it.

Cut short lengths of tube, with the utility knife, to connect the bulkhead fitting. When using a ball valve to turn the water off and on, connect it between the reservoir and the pump.

Publish an electronic timer to the pump system following manufacturer directions for the version of timer.

Installing Mist Nozzles

Produce holes in the lid of the terrarium for the misting nozzles. If the lid is plastic or glass, make sure the lid is padded to reduce vibrations before drilling the holes. For screen lids, cut holes of the size that is correct. The size of the holes will depend on the type of misting nozzle you choose

Disassemble the misting nozzles carefully. Simply separate the parts of this misting assembly which will connect the nozzles via holes in the lid. Do not unscrew the tip of the nozzle. Misting nozzles are set to discharge water particles between 50 to 100 microns in size, and the flow speed can be altered by touching them.

Slide the bulkhead of the misting nozzle assembly through the hole and secure it. Attach to the Peak of the nozzle. Cut and measure tube together with the utility knife to attach nozzle and the T-connector to the pump.

Continue installing misting nozzles until the nozzle is attained. To complete the misting system, attach by means of a union elbow connector.

See related