Laminate book-shelves produced from particleboard that was coated have found their way into several properties. Their low price makes them an outstanding option for someone on a budget, but, due to their covering, the colour or the the final of your book-shelves can restrict your decorating choices. Usually the paint peels in the surface when trying to paint book-shelves, or ugly scratches are created by shifting even a mild item over the book-shelves.Avoid the pitfalls of painting laminate by utilizing methods and primers that will change outdated laminate book-shelves right into a stunning piece of furniture.

Newspapers on the ground Phoenix in a well or a tarp -ventilated location. Place the book-shelves on the area that is coated.

Safety goggles, Don rubber gloves along with a respirator designed to guard against organic vapor and acid gasses.

Mix together 3 cups of ammonia with 1-gallon of water in a bucket. Use an old rag to wipe down the book-shelves that are laminate using the ammonia to remove grease, grime and any dirt. Allow the book-shelves to dry.

Fill any indentions and protect any screw or nail holes. Spread the filler using a putty knife. Wipe away any excess filler in the surfaces. Let the wood filler dry. Drying time will vary based on humidity level and the ambient temperature.

Sand the the top of book-shelves that are laminate with 120-grit sandpaper enough to roughen the area but maybe not enough loosen the laminate or to tear through. Wipe the book-shelves using a tack cloth to eliminate the dirt produced by the sand-paper down.

Check the temperature to ensure it’ll not exceed 90 degrees. The humidity level WOn’t go above above 70%. Applying a primer to the area when humidity levels and temperatures exceed these limitations can result in bad item adhesion to the area.

Apply a shellac-based primer to the area. Choose possibly a spray-can or use using an artificial-mix paint brush. Use brief, even strokes using brief or the brush, even passes on the surface having a spray. Make sure you use the primer in one course for even protection.

Allow the primer before implementing a second coat of primer to dry for 4-5 minutes. Let the primer treatment for at least three times before implementing paint to the book-shelves that are laminate.

Sand the bookshelves’ area lightly with 22-grit sand-paper. Wipe the book-shelves having a tack fabric to eliminate any primer dirt developed by the sand-paper.

Pick shade and a latex paint complete. Choose from satin, an egg-shell or semigloss paint end in the shade of your choice. Finishes are harder to clear and mo Re susceptible to stains. Finishes are reserved for cupboards and trims, but are tougher to discover, as this finish is not offered by some producers.

Stir the latex paint having a wood paint stick. Continue to sti R for a T least two minutes to mix the contents if the paint was shaken by a device where it was bought by you.

Paint the bookshelves with a-2-inch-extensive synthetic-blend paint-brush. Use long strokes to ensure protection and colour on the shelves. Let the paint dry for two hrs. Apply an additional coat if required.